Not really! If you mess it up you can just hit No+LFO!
I think the timeout was a bad choice and should be removed. Changing LFO settings on previous devices has never been an issue.
Sorry for not being more specificā¦inadvertently changing an LFO destination can be very LOUD. That is my major concern.
2 Likes
Maybe they should change the way it works entirely. Make it so turning the knob does nothing, instead you have to press it first. No need for confirmation or timeout. If you use another knob the change is committed and the popup menu goes away.
1 Like
How about just making the initial turn to open the LFO assignment menu less sensitive and removing the timeout completely.
Once the menu is open the knob regains normal sensitivity.
Confirm with yes, discard with no.
3 Likes
Thatās probably the best solution that hardly anyone would notice, and would only benefit from
1 Like
Agree with this. I have no issue pressing YES when I change the LFO, but the LFO popup timeout adds stress when Iām choosing a destination. I even scroll it back and forth to try to keep it open.
Maybe the click encoder could be used to toggle the behavior if the LFO popup stays open, or closes automatically (like a āpinā and āunpinā action).
2 Likes
While weāre on the subject of timeouts, I also hate the timeout for pattern select.
Sometimes I just want to switch patterns while jamming, especially when using multiple machines.
And sometimes Iām waiting for a pattern to loop around and it times out just before I want to select a pattern.
I would like an option that just keeps the pattern select open, also after selection.
Maybe a global no timeouts option?
2 Likes
Elektron gear always gets lots of interesting updates and usually few big ones as well, but I feel like Digitone has been left into shadows a bit.
Just give it 6 operators and it will make waves! New algorithms you could get from 6op would explode and Digitones would fly off the shelves!
2 Likes
Please Kb fold for next firmware! 
13 Likes
Iād like to see Pattern-Change-Options like in the AR and AF. Would be really cool.
1 Like
More filter types would be the bees knees baby, a notch would be top notch
9 Likes
After seeing a Syntakt demo: Iād like to get a Chords mode like the one in the Chords machine on Syntakt, maybe with Chords as 1-2 p-lockable parameters.
3 Likes
Requesting a personalization option āREC MODE TRACK CLEAR ONLY or CONFIRM PATTERN CLEAR ā a safety that protects against unintended PATTERN CLEAR or PATTERN TRIG CLEAR while in REC MODE, for 
newbies like me. (Itās IMHO ājust easier than it needs to beā to clear the pattern trigs in āthe heat of the momentāā¦)
REC MODE TRACK CLEAR ONLY could limit FUNC-PLAY when in ANY REC MODE to only clear the TRACK. Leave PATTERN CLEAR or PATTERN TRIG CLEAR to the more labor-intensive methods, like entering the PATTERN MENU and choosing CLEAR: manual section ā10.7.3 CLEARā.
CONFIRM PATTERN CLEAR could pop up a yes/no dialog requiring confirmation before clearing pattern trigs while in REC MODE.
Because: itās buzzkill when I clear my working pattern by not noticing which record mode Iām in when I hit FUNC-PLAY, intending to clear a track. By the time I notice Iāve done this, sometimes itās too late to undo. Then Iām left scratching my head about whether the pattern was saved to the TEMP SAVE or not, or whether it was saved to the project or not (probably not), plus philosophizing about what it means that the Digi boxes and Model boxes are all āsaving everything all the timeā but I just lost my pattern by not focusing on which REC mode I was inā¦?
In the meantime, I could get better about doing TEMP SAVE more oftenā¦ but every time I lose my work I put the DN aside for awhileā¦
I turned to the manual for help, but the section under 10.10.6 COPY, PASTE AND CLEAR OPERATIONS is ambiguous. Iām going to post about this in the documentation thread.
4 Likes
Losing work has definitely made me a lot more conscious of which mode Iām in 
I donāt temp-save nearly enoughā¦
2 Likes
Seriously, I donāt get why the button combination for pattern clear is not just PTN + PLAY(Clear).
Any other combination doesnāt make sense.
2 Likes
Doesnt FUNCTION+CLEAR wirk for you? One step less.
The problem with FUNC + PLAY(Clear) is that it is double assigned depending on REC mode.
It makes no sense at all, while PTN + PLAY(Clear) does nothing at the moment.
3 Likes
True. I see what you mean.They could assign a singular function pattern clear. Hopefully, next update
1 Like
Iāve been working with my DK again lately, and man, the whole ābrand new everythingā upon pattern change is such a drag.
I propose a ācontinuous modeā or something like that, where the tracks/voices/all the other sound settings remain the same in a project unless you change them, just like the RYTM, OT, and A4.
This would also allow one to tweak parameters continuously and avoid jumping to saved values upon pattern change, which has donked me up dozens of times.
3 Likes
Hey guys, do you believe this thread is even read by Elektron team, or it is just a blackhole where our fancy pink unicorns disappear forever ? Iād be curious to know how many wishes have been granted.