you could record the 19 physical channels and 13 more from a Daw, all at the same time via the qu-drive without the breakout (dSnake addition) box. 32 total with the dSnake add-on and no daw tracks
wait what? But there are 22 āchannels of analogā inputs. And a USB stick on the Qu records 18 channels max (could be from inputs, or mix busses, or fx returns)
Sure, but whatās with all the prime numbers!?
fair enough , ā22 channels of analog inputsā then, since weāre splitting hairs.
The numerous MIX outs are your aux sends.
Yes, of course.
The mix sends are not like an ALT 3/4 bus (100% level send)
There is independent mix (aux) send level for each channel that you are sending out of those mix outputs.
Check out the user guide at A&Hās website, itās a well produced PDF. Loads of graphics that help it all make sense.
This mixer feels really next level to me, in comparison with any mixer Iāve been using previously.
I like all the possibilities of routing, itās still a bit mind blowing. The fact that you can set any of the selection buttons or hot key panel to fit your needs is cool, make do for the abscence of direct controls.
There are still a few things I donāt see how to do, but feel like the answer is under my nose.
To be clear : I want to send a Mix through USB to the computer, send it to Ukraine with a streaming app (letās say FB or Skype for instance), and get the audio back to a stereo input. So far I do it the old way, with the computer audio in & out.
Multitrack recording to USB key is dead simple, although the configuration and the launching could have been gathered in the UI.
One aspect I dislike is that unlike analog mixers, it does not support well any overturn : you HAVE to handle properly your incoming audio levels or you get some horrifying digital cracks ! Eeeksā¦
I havenāt understood why even with the lowest (analog) gain I still get cracks if the Digitone or the A4 is set to full volumeā¦ For me the analog gain should come before any AD conversion, itās weird.
Itās a very good mixer, and I like the sound and possibilities it offers.
But to me itās not yet perfectā¦
Goddammit, this thread finally made me get a Qu Pac yesterday from nice user @rennweg.
Really canāt await the incoming of your AK, @Ray-Ray_Velouria!
Awesome footprint for the abilities.
Hope it stays intact for a loooong time. The fans in the breakout boxes are a bummer, thoughā¦ anyone has the 1608 or 2412? Are they as loud as the 0804?
for those of you who may be having usb streaming issues, thereās a new firmware thatās suppose to resolve them.
I returned it, eventually: I dislike the fact that I got some cracks with too hot incoming signals. Itās like thereās not enough headroom. Anyone experienced this ?
With the impossibility to control other band members incoming signal gain, I couldnāt avoid those cracks in live situationā¦ Weird.
The other thing is that I figured I need a slider per track. I now have to find a new mixer
Yah, this happens when I have the gain set too high in the qupac. Since I monitor through my daw, I have so many stages to adjust gain that itās not a problem now. I just adjust the gain on the qupac down since i can just bring it up in the daw. it hasnāt been an issue for me but every so often Iāll experience it and it can be annoying.
Iāve thought about selling it and getting a Motu 16A but itād require me to invest more money, Iād lose inputs/outputs (I also use an AR84 to expand inputs/outputs) and have to buy a bunch of new audio cables. Iāve also invested a lot of time learning/configuring it. All the stages of gain have actually been helpful in the mixing stage and the plethora of routing options it provides is totally awesome.
I might have been unclear : I experienced a too high gain and the cracks that come from this.
Totally normal, and I can handle that.
My problem is that (slightly different) cracks appear BEFORE the input gain = even with input gain set very low.
Set a synth with high resonance, and try this : that might be a defective unit on my side. But I was really under the impression that input headroom before gain was too lowā¦
Sound like a defect to me, too. Do you encounter this on different channels? Maybe a blown input amp.
How loud/annoying is the fan?
Yes, Iāve witnessed this on several channelsā¦
It was very weird to me to encounter this, because preamps are said to be analog. Precisely to avoid this, I guess.
But the cracks were digital, I believe.
After the amp, the signal is ADed. So when the input to AD is oversaturated, crackling mayhem begins.
But when on different channels, it not likely.
What did A&H say? They offer great support.
It definitely whirs and is audible, but yah, I have it real close to my ears though itās not a deal breaker for me.
Do you know if the bigger extensions also have active cooling? Could not find any material about this.
Iām assuming they all do.