Model:Samples Tips & Tricks Thread

[minimal.camera]

You are correct! Blank trigs and ‘normal’ trigs with no p-locks are OK as long as there’s no other trig conditions to break the chain. And I like your term ‘Fill Cascades’

[samglover]

I just accidentally learned that when naming a pattern you can press FUNC + PAD MENU (︎) to backspace/delete the current character. So much faster than selecting blanks one at a time!

[bibenu]

@kraster

Controlling LFO retriggers/modes with parameter locks.

I think the details of controlling LFO Modes via velocity must have changed at the 1.13 firmware update or something because I’ve got different modes.

Basic setup

LFO menu

Wav Saw
Mul x8
Dst PTCH
Dep 6.0 (one octave)

LFO Speed 38

(I chose pitch because it allowed me to clearly hear how much of the cycle was running)

Pad/Vel Menu

VDep 0
Dst MODE
DDep 2.0

The experiments

PAD hits Varying FIX on Pad/Vel Menu - WITH RESET OFF on LFO Setup menu

1-31 - free run
32-63 - reset
64-95 - hold
96-127 - one full cycle (start with reset)
OFF - free run

Sequenced Trigs varying Velocity - WITH RESET OFF on LFO Setup menu

0-31 - free run
32-63 - reset
64-95 - hold
96-127 - one full cycle (start with reset)

PAD hits Varying FIX on Pad/Vel Menu - WITH RESET ON on LFO Setup menu

1-31 - reset
32-63 - hold
64-95 - full cycle (start with reset)
96-127 - half cycle (start with reset)
OFF - free run

Sequenced Trigs varying Velocity - WITH RESET ON on LFO setup menu

0-31 - reset
32-63 - hold
64-95 - full cycle (start with reset)
96-127 - half cycle (start with reset)

[bibenu]

Tip from elsewhere:

@bibenu

@doonee63

I tried to find the full filenames of the samples, but users don’t have access to the factory folder in Transfer

You can sometimes see a longer file name, briefly, by holding down [TRACK] and then picking a different track. It doesn’t work if you pick the track you’re on, it has to be a new one, and the name shows briefly in the display.