I researched int he Forum but did´t get this working.
What I want to do is assign track 1 to cue output one track 2 to cue output 2 track 3 to master output 1 and all of the other tracks to master output 2. How can I set this up? I entered studio mode but could´t get it working.
A second question I have… Is it possible to Internally record all of the 8 tracks to the Card? Can it only be done with static machines? What if I want so use flex machines?
Thanks for your Help!
Adjust the BALance for track 1 to be fully left (see page 69 of the manual)
Adjust the BALance for track 2 to be fully right
Adjust the Cue level for tracks 1 and 2 to be high and the Main level to be low (page 68 of the manual)
Adjust the BALance for track 3 to be fully left
Adjust the BALance for the other tracks to be fully right
Adjust the Cue level for tracks 3 to 8 to be low and the Main level to be high
Static machines and flex machines are only used to play back samples. Recordings are made to the Track Recorders only. The Track recorders are in RAM, but you can save their contents to the card. You cannot record directly to the card. See page 48 of the manual.
Thanks a lot! Alright so is it possible to record all tracks to the track recorder over the length of a whole song?
If your song is a few seconds long, yes.
If your song is longer than about one minute, no.
Thanks so I can´t record them separately. Just with the setup of my mixer with a few single tracks.