You can filter some midi messages on the settings page yeah. But just turning off sending midi clock in DT and not double tapping stop saves you 40 dollar ;). Unless you want to use DT as a poly and Euclidean.
Well I haven’t changed the settings on the cable for quite some time but you can see in the settings video I did you can filter out clock and midi channels yeah :). I think their might be a more advanced settings page now no?
On DT it sends notes off as well.
Everything that causes an infinite loop will make it crash. So sending and receiving midi clock will do that. A note stop message probably causes it to infinitely send stop messages to itself causing it to freeze.
So afaik these are the only things you need to bypass.
Ok thanks. Not sure to have the time to try till next week.
Ah and I forgot, my laptop screen is dead ! I can use my smartphone to copy / paste / edit the code though.
I finally decided to go and buy the RK-002 cable for the DT.
I have the polymux and the euclid firmware installed.
The chromatic keyboard works fine. I have tried to set it up to play midi chords into the track channel (i.e. midi trigs). It works for a little while then crashes. I know I can of course play live and record the notes in live recording mode from the midi keyboard to the track, and then quantise etc., but is there a way to sequence midi trigs without a crash?
I have the same and it works. Although it took me some time to get my head around it. Maybe check the midi sync settings. On YouTube there is a video were it is explained quite well.
MIDI track A is firing off TWO notes at once. (channel A is set to 9 in midi, matching the default setting in the DUY download from retrokits. )
strangely, if I copy the whole midi track A onto B, then the notes on tracks 1-4 cycle through individually. However, on track A, they double up (1+4; then 2+3, or sometimes 1+2; then 3+4). What on earth os going on guys?!
…and yeah, it seems the DUY does not remove the cc120…
EDIT: FYI : I have fixed the double voicing on track 9 - the midi settings should be set to off (unlike the settings suggested in one of the youtube videos).
However, the euclidean + polymux code does not enable double stop (all voices off, cc120). Someone should fix that.
Damn! Tried to get this working for the last 3 hours with 4 different audio interfaces. No success so far. I wish the cable had an led that shows if it recieved the firmware and the setting changes.