SYNTAKT Bugs Thread

A post was merged into an existing topic: How hot does your Syntakt get?

Periodically when using the overbridge VST my computer will go to sleep or something and Iā€™ll come back to it and the audio will be crackly and completely unusable. I can restart it and the audio will be clean again.

1 Like

I think I found a bug:

When using the double notch filter on the FX track, if youā€™re putting trigs with an attack enveloppe you can hear ā€œplopsā€ when thereā€™s no sound at all, especially at lower filter frequencies. And as you move the filter frequency up, the ā€œplopsā€ moves from left to right in the panning. It doesnā€™t happen at all with any other filter types, only the dual notch. Very weirdā€¦

1 Like

Itā€™d be a lot easier to deduce what you mean with steps - but having found clicks - rather than ā€˜plopsā€™ - I was initially surprised to hear what you described in terms of panning - this filter type is there for phasing effects, so the tuning of the filter is affecting phase and pan of where you hear the click/plop

the way to remove the click it is to disable Amp Envelope reset

I donā€™t think the panning/clicking is 100% a bug, but they may be concerned that the way itā€™s set up is resulting in artefacts that may be something they can dial out, I know this is an area that has had tweaks, so it may be worth flagging up officially to see if thereā€™s any concerns - I imagine itā€™s just a consequence of a phase shift left/right and thereā€™s therefore a different effect left to right depending on where the amp envelope is being reset from - it may be something that can be managed better, who knows, ask directly

Itā€™s there in LPN too, but super subtle

When previewing a trig on a midi track, only the base note is being sent out (that is, not NOT2, NOT3, and NOT4). However, when playing a sequence with the very same trig, all note on events are being sent out.

This might be intentional but in that case I donā€™t understand why (and I would say that the expected behavior for anyone using the machine would be that all notes are being sent during the trig preview).

1 Like

Itā€™s not intentional, itā€™s a bug I noticed too. On the DT, the preview of trigs on MIDI tracks work as expected.

1 Like

Ok, thanks for the information. I created a ticket regarding this on Elektronā€™s website.

1 Like

16 steps track with 64 steps fx track doesnā€™t function.

Retriggers seem to reset after changeing parameters. So set step to retrigger 20 or some , change Some parameters in that track and the retrigger is gone.

Sometimes automation is cleared when working on pattern. P-locks will sometimes dissapear.

Cubase 11 , after editting and opening snotter vst , overbridge plug-in Will collapse to Tiny window. It Freezes the Syntakt reboot is neccesarry

There might be some good feedback here, but it looks a little short on details that will allow confirmation @_lex

I aspire to describe the minimal steps from a blank pattern to reproduce, if possible !?

Hi,

I had the issue yesterday that my Analog Kick sounded different on the first Trig. Means when I changed my pattern and the kick started, the first one was much quieter as the others. It was always only the first one and it did not happen always. Does anyone else also saw this bug?

Regards Alex

actually this might have happened in my projects as well!

if you said it was a digital machine itā€™d be more puzzling, however, itā€™s not inconceivable that an analog voice will sound different on the first hit if parts of the circuit are not ā€˜stimulatedā€™ ā€¦ it happens a lot with analog four drums made from resonant filters - and a cure for a normal phenomenon (if itā€™s indeed that, it seems most likely) like this is to ensure a trace of noise is flowing on to the trig, or have a grace note before it thatā€™s near inaudible - this is one reason why itā€™s generally the first hit of an analog voice that isnā€™t sounding - it depends on settings

you may as well share either the machine or settings so others can compare

it may be possible to allow a voice to ā€˜settleā€™ or maybe just swap the voice momentarily for a silent sound lock so itā€™s in its ā€˜circuit deadā€™ state

and just monitor how long (between trigs) it takes to get false triggers by tapping the track manually

maybe put the nulling silent lock trig on the track so you can easily press play to hopefully ā€˜silenceā€™ the voice on that track

or

make a simple test case with two patterns simulating your use case and explore whether a grace/ghost note pre kick will remedy it - if it does, itā€™s just the way the voice works rather than a bug, at least the precedent is long established with other boxes with analog voices

Iā€™ve reported a bug regarding sound locks not adopting the correct machine on the first pass - are you using sound-locks, out of curiosity

it helps to try to identify the root cause by simplifying things right down to the minimum of variables

More about that ? Did you signal it to Elektron Support ?

I wonder if it sends CCs, didnā€™t try yetā€¦
Edit : CCs works.

Hi! Yes, I raised the issue to support and they confirmed this is a bug to be fixed and that Syntakt should behave the same way as Digitakt in this manner.

2 Likes

Hereā€™s a strange one: I loaded my first project via Transfer today (it was from @Eavesā€™ fabulous Patreon posts) and although I see trigs sequenced and all the levels up, I canā€™t get a single sound out of it. Even in keyboard mode, even across multiple patterns and banks.

I checked the mixer and all the levels look good. Even started a fresh pattern inside of the project - the init sounds wonā€™t even play. Any idea whatā€™s causing this?

Update: I loaded a revised version of the same project, and this one seems fine. I suppose the first one was corrupted somehow? Strange.

Thanks for the support!

Itā€™s not a bug, I have INT TO MAIN set to OFF, which makes it so that audio is sent only over USB. I do this to prevent a feedback loop where audio from the Syntakt is processed in my DAW, then sent out to the Syntaktā€™s headphones out, and gets picked up from the headphones outs by my DAW again and gets processed again. Setting it to AUTO or ON should let you hear the Syntakt again :slight_smile:

2 Likes

No I have not used a Sound Lock. I just loaded a preset on the track.

pls share which one then so others can investigate whether the voice is sensitive to being ā€˜primedā€™