Ofcourse you can, on the mixer, there is a knob to select the input, (USB1/USB2/RCA/Phono) or you can select i/o in Abelton preferences for example. 12 in 12 out. You have to split this 12 between with the USB selector though.
I personally think that i can only control so much at any one time, that limiting factor isnt the amount of channels you have, its the amount of hands you have, and the ergonomics. If the synth is too far away on the desk its hardly used.
correct me if iâm wrong but wouldnât it still transmit the tracks regardless of what youâve enabled in a DAW or which route youâre monitoring on the mixer itself?
I was referring to multiple I/O. In my case, I tried to run 6 outs, 4 from Traktor, and then 2 send/return fx chains from Ableton. I had to set my buffer large enough for it to be fine.
This was on a fairly beefy Windows computer, which has no issue doing the same on my usual interface. But it might be a driver issue with Windows/ASIO, I expert performance in CoreAudio to be better (as usual).
Hey again folks, so I am picking up this mixer tomorrow in Vancouver which is a 1.5hr drive away from Whistler where I live. I am planning on using my Roland Space Echo as one of the sends and have a question about the cables I need please - I know the left input needs to be a TS cable to turn on the power as I found that out the hard way, but I want to run it in stereo so was wondering if I can use TRS cables for the right in and then for the left/right out? Or should all of these cables be TS? Thanks in advance - I searched on line and could not find a definitive answer.
I am thinking about adding a room correction DSP system into the insert send, the result would be that the USB recorder of 11/12 would record with that DSP? I.e. if i want to avoid that, i would have to add the DSP just after the output ?
Something like the miniDSP Dirac device, or similar.
I actually thought about a 4 in 5 out system. (2x for monitor, 1x sub, 2x rest of the room.)
Does this mini DSP allow seperate measurement , loading two different profiles at the same time?
So I had a test drive on my friend s xone96. Using cue 1 out as a 3rd fx send works as expected. Great!
I kept return D cue d permanently to prevent a feedback loop happening when all channels get un-cue d. Sacrificing return D channel for that would work in my setup.
But i ran into another inconvenience: when one or more channels are cue d - which is always the case in this scenario - the master volume meters switch to showing the cue signal instead of the master. So i d never see my mix s output volume metering.
I guess i could learn to work that, but it s not ideal.
I looked hard for a way around this but couldn t find it. Anyone see something i didn t? Using cue 2 for this has the limitation of only being able to send 1 channel at a time.
Besides this the mixer feels and sounds awesome. So much more inspiring than the Mackie i m using now.
Yeh I dont like the cue/master meter toggle, just give me option for âalways masterâ. I use a pioneer rmx fx unit on master insert and use the pioneers meter to monitor my master. Generally iâm always cueing.