AR no sound over USB

Elektron Software Overbridge
#1

I don’t have sound via USB since I have a new computer with Windows 10. Calibration and factory reset was unsuccessful.

What else can I do or what could be the reason?

#2

Have you configured your settings in the OB Control Panel?

#3

Check the basics …

  1. Does the AR generate sound at all?
  2. Is the AR on USB-Overbridge-mode? Check <System/USB Config> “OVERBRIDGE MODE” in “S’YSTEM/USB CONFIG”
  3. Is the Overbridge software installed correctly?
  4. Is the Overbridge software started? You can see then, which inputs are on/off and receive signal?
  5. Check the settings in the OB Control Panel as @Ryan says
  6. Is the plug-in operating correctly
  7. Are your DAW settings correct … if you use Ableton Live, switch the USB-Midi-mode to “OFF”

BTW calibration is only for the analog circuitry and wouldn’t be helpful for USB-interfacing anyway.

#4

Problem solved. The Overhub does not work with 3.1 USB. Now connected via 3.0 USB.

Now everything works again.

Thank you very much for your efforts!

2 Likes