Digitakt 1.04 : Bug reports

[LyingDalai]

Firmware 1.04 is now released, discuss here

---

You encountered something wrong in OS 1.04 and want to check if others can replicate it ?
Here is the place.

Doesn’t replace a support ticket, of course, but you might want to check if it’s not a feature before declaring a bug

Please report all bugs via the Support Tickets section on elektron.se if they have not already been confirmed below.

---

[jcd]

Still not fixed in 1.04:

1. When the Digitakt is in pattern BPM mode and you nudge the tempo via < and >, it jumps to the previously set global BPM value instead of using the pattern BPM as a reference for nudging (i.e. when accidentally pressing the < or > keys you sometimes have extreme tempo changes).
2. Quick pattern copy/paste/clear (described in the manual as “After a pattern is selected, and before releasing any key, [RECORD], [PLAY] and [STOP] can be pressed to copy, clear or paste patterns without leaving the active pattern. It is possible to clear and paste multiple patterns at the same time.”)

[Olle]

Still not fixed in 1.04

If it isn’t in the change log then it hasn’t been addressed.

[eangman]

The patten quick copy/paste/clear passage mentioned here is removed from the manual for now.

[jcd]

But it is planned to be implemented?

[DaveMech]

Please fix in 1.05: When changing track length while the sequencer is running, the track goes out of sync.

[BossDoggington]

Man I sure hope so. I’m really 50/50 right now in if I should return this thing…I should be gigging with it by now but these horrible bugs make it unworthy. Like accidentally nudging the > or < button is a set ending catastrophic disaster, it should be a barely noticeable tempo bump, but instead sends your set into a crashing landing back at 120bpm.

[Geir]

Still get freezes when sending midi to self. MIDI H->Track X. It happen when I press stop. Not always though.

[re5et]

extra details might be good , as ive been tweaking length and had not problems of sync.

internal track ? midi track ? changing from 16 to 32 to 48 or 16 to 7 ? .
is it slightly out of sync or a particular amount of steps.

to be honest, when i was changing things initially i thought there were problems but i didnt understanding how to also change pattern master length , so it seemed that an unusual track length was a little odd. but it was user error .

[DaveMech]

Set m length to infinite, and ch length to 16. Then change track length to 5 for example, then change it to 8 or 16. Do this before the sequence is at 1. Now the track won’t start on the 1 as the other tracks.

Hope I explained it well enough

[re5et]

thanks

yup , it goes a bit weird.
could be handy , but probably not as designed.

i think any relevant info on bugs is always handy , if it helps people to reproduce it , add the info.
then if they fix it , they know how to check with a repeatable way .

[ILL-GREEN]

In the SRC screen, the play-bar that runs across the waveforms, tends to run infinitely for Trigger #7 without any sound output. If I hit Trig#7, it plays normally, but the bar will continue running from left to right. When I set Play to reverse, it ceases, but when set to forward, the bar runs freely again.

[AAdra]

Freezing. Randomly stops playing samples. Ran Test mode reported no errors. However when I pressed the Kick & Snare buttons while in test mode I get a yellow and black screen. Is this something an OS update will solve?

[Buska]

Mine does the same thing in test mode

[Padevil]

Random freeze while using audio and midi. Couldnt reproduce the error =(
So underwhelmed by the lack of stability

[Olle]

Random freeze while using audio and midi. Couldnt reproduce the error =(

Report to support. Almost all reported freezes using MIDI has been MIDI feedback. Check that you don’t have a MIDI loop.

[Olle]

Still get freezes when sending midi to self.

This is most likley MIDI feedback.