Faderfox PC4 - multple device - Midi

The Lounge Other Gear
#1

Hello,
I recently acquired a FaderFox Pc4. I own an Elektron AR mk1, an Elektron Digitone, and a Behringer TD-3.
Here are the MIDI connections: Midi out AR - Midi in Digitone // Midi out Digitone - Midi in TD-3.

I would like to know if it’s possible to use the Pc4 to control both the AR and the Digitone. So far, I can only control the AR (midi out Pc4 - midi in AR). And if it’s possible without using a MIDI Thru box.

PS: When I connect like this: Midi Thru AR - Midi In Digitone, I lose tempo synchronization.

Thank you for your responses.

Edit : Jox found the solution, everything works perfectly. Thanks.

#2

I am not sure if this will work, but you could try this:
PC4 -> Midi in AR
AR Midi Out -> Midi in PC4
AR Midi Thru - > Midi in Digitone
Digitone Midi Thru - > Midi in TD-3

Transport and Clock receive on the AR must be set to OFF

EDIT: on the PC4 routing setup you have to set MIDI IN to MIDI OUT.
On the AR you should switch off sending notes and controllers, if you don’t want anything besides midi clock going to Digitone.

1 Like