Help getting DT clock to Shuttle Control

Elektron Gear Digitakt
#1

My goal is to create a drum sequence on the DT and use it as a master clock to add sounds from the rack. I’m trying to use the Enrophin.es Shuttle Control to do that, but I keep getting inconsistent results.

I have patched the DT’s MDI Out SyncA port toe the 5-DIN in on the ShuttleMate. Then from the USB “B” out on the Mate to the USB A in on the Shuttle Control.

I believe the problem lies on the Shuttle Control side, but I was hoping to confirm that at least my MIDI and USB settings are correct (MIDI+USB qnd Overbridge, respectively). And any other pointers I would take as well.

Thank you!

#2

Make sure that the DT is sending MIDI clock messages. In the settings menu, go to MIDI CONFIG and then SYNC. CLOCK SEND should be checked. You might also want to check TRANSPORT SEND so that the DT sends Start/Stop messages when you press the Play/Stop buttons.

1 Like