Hello my Friends… Today , I was using this beauty machine when I had a “big problem” . I connected my Juno 106 from the mono output to Input A of the Elektron. I went to the part of GLOBAL … I Confighure everything for the trig A. to receive signal from my Juno … Below select which of the 16 channels that want to sound input … In my case I selected the first channel… and got up several options. “SENS GATE UMIN UMAX” . SENS was the only one parameter that I touched as it had no sound at all. … I set in 40 … so random … When I touched the Juno … I listened a horrible sound … not strong … but as a distortion in low frequency … the classic “popcorn noise” mixed with white noise and weird stuff … I got crazy and disconnected everything … (including midi clock that sent him to the MPC 2500) … Since the Elektron being without nothing connected only output was crazy … It did not show me the tempo … if I set play it did not start right away but after 3 seconds … If played every step sounded sounds assigned but not the lights … At times, all lights lit up the track selection all at once or turn them out and lit in a crazy way … Anyway … I Freacked out !. tried to get that configuration and could neither access the menu global. I turned it on … and it happened the same as before… I could acceed but i did not show me the tempo in the screen. After trying everything I could then access the menu . I went to the part of TRIG A … remove the selection track not to sound in any imput nothing … (, pleaser remember the Juno was and I was not even connected) and I lowed the SENS to 0 … I went out the menu and worked perfect … I turn it on and off 4 times and it went on working perfectly… I said ok to myself. . Here’s the problem … I went to the Menu again … and back configure the imput trig A sound in step 1 … Nothing happened I was still working well … I Turn up SENS and it went well too. I STOPped it and Once again it came back to sequence it was playing. ONCE AGAIN OUT OF CONTROL AND MADNESS… It did not allow any parameter … I realized that there is the problem. I went crazy to access to the Global Menu and to return it to 0 . Finally could set it well. After that I turn it off and turning it on again
After all this I turned it off … and kept the FUNCTION button pressed and accessed the Menu to see if the Elektron had any failure .I activate the TEST MODE … And it was all OK … there was anything unusual, everything is as it said the Manual. I need a solution as soon as posible.
Its the first time i use the Input section in the MachineDrum.
Sory for my english… Im from Argentina… I hope this was a Software Bug and not a hardware problem. Please elektron help me
I purchase the machine in september of 2014.