Hey fellow digitone users,
the title pretty much sums up my question. My setup looks like this. I have a BS2 which I want to control via my digitone and a volca sample which only needs the clock signal of my DT. But unitl now, I couldn’t find out how or if it is possible at all
best regards
Marcel
BS2 Midi Out → Digitone Midi In
Digitone Midi Out → Volca Sample Midi In
To sync everything you have to active “receive/send” clock on your devices.
If you also want to send Midi activate “receive/send” midi.
Let us know if it works 
This was my workaround, sadly the BS2 clock is no very stable. But if I use e.g. ableton for giving clock it should be allright.
I was just confused because the MIDI ports are also called Sync A and Sync B.
Thank you for the quick reply.
This refers to DIN-Sync only (not MIDI)
Hm after checking the manual (page 60) things getting clearer and confusing 
So if i understand correctly the THRU Port is able to send DIN (24 or 248) sync or MIDI notes.
So if you set Midi OUT PORT FUNCTIONALITY to DIN 24/48 there will be no Midi Data transferred, but the a DIN SYNC.
I guess you can use Digitone as a MASTER,
This could work or iam totally wrong 
Edit: receive clock on Digitone must be deactivated
MIDI thru just echos what is received on MIDI in, which can be the DIN in or the USB in or both… It’s not the same as a MIDI out. Digitone has one MIDI output.
You may just want to get a MIDI thru box
Digitone ----MIDI OUT---->MIDI THRU BOX---->all your other devices, set to diff channels
Din MIDI Thru doesn’t echo anything from USB (only DIN in) on the other devices, it’d be a surprise if this was different on DN (which I don’t have so who knows)
what he said, read the manual wrong
“THRU PORT FUNCTIONALITY selects what type of signal the MIDI THRU port sends.”
(Not what it echos)
