So Syntakt seems to have a noise issue when Im using Overbridge, I have this white noise coming out constantly. I also own digitakt and digitone - both of them produce little to no noise even when I crank up the levels at mastering. I also noticed that the majority of the noise is coming from the analog fx track (when I do 16x stereo individual tracks and stop monitoring it - most noise disappears).
Ive already got the unit replaced - no change, so I must be not getting something?
…i expierence a massive difference in maingain of the st, compared to other digis…
so, first of all, i’d say, lower ur main volume output of the syntakt…
it’s already incredible loud at 12 'o clock…
the internal gainstaging in this digi/analog hybrib, where also filter and overdrive settings created each on their own from both domains while have to coexist, to blend and compliment each other, is a tricky thing…
and check ur analog filter settings…resonance might be way off while not visible yet, when low pass is still totally open…
Hey,
Thanks for the reply! I may have not been clear enough -the issue is when I am using Overbridge!
The machine doesnt make a noise as loud when I listen to it directly with headphones. Another thing, is that the analog drive effect is way more amplified when I am using Overbridge. Again, it sounds normal when I listen to the machine directly…
Any solutions? Im just trying overbridge for the first time and there’s a high pitched buzzing in the background. Sounds like interference from something.
I made some test, not only I have the issue on overbridge, but also with the analog outputs. And I also tested the headphone output, same issue. The noise is located somewhere on 4khz, very difficult to get ride of it. The only way I could get rid of it is when I turned the stereo recorded track from the Syntakt in mono.