Hi all, I’m new here with a new device and an upcoming performance. How can I stop or mute one single sample playing: I use long (30 second) samples and have added a slow attack. However I can’t add a slow release nor can I stop the track playing (I can stop everything). Thx, Philippe
Is it playing as part of a pattern?
If it is you could add a ‘conditional trig’ so that it only plays the first time the pattern plays (or every other time, or whatever works best).
I trig the samples with the trig buttons in a live improvisation. So, no patterns (so far)…
Okay, maybe the play mode is set to ‘forward loop’ on SRC PAGE 1?
It can be changed to just play once which I think is what you want.
Indeed, is set to play once, but how can I interrupt it half way?
Either put a trigless trig lock by holding FUNCTION and putting a trig down where you want it to end, and then while holding the trig go to the amp page and 0 the volume.
Or just shorten the sample length on SRC page, or shorten the trigs AMP envelope to your liking.
Function + bank once or twice
mutes per pattern = purple.
Master mutes = green
You could also put down a trig with a fill condition, that is set to 0 on the AMP volume
So that when you press fill it activates that trig, but you should put the NON-FILL trig condition on the rest of your triggers, so they don’t make a sound when the loop comes back around.
I tried turning down the volume. This works off course but the next time I want to play that same sample I have to reset the volume.
I’ll try this
Another approach:Set AMP hold time to note and short or none release. You trigger the shots and hold as long as you want to have them played just as a synth can do.
that’s a bit awkward since 3 or more samples can play simultaneously for a while while I have other things to to on modulars and stuf…
Then indeed it is awkward
Do you always want it to play the same length? If so you can either edit the sample to make it shorter, or adjust the envelope.
Maybe get yourself a little controller such as the Korg nanokontrol to quickly mute a sound…
Or just switch to master page and play with track levels. That’s what I do, it’s totally performance/improvisation oriented.
Press > Audio Routings > Route To Main
You can use this page to perform your audio mutes. Once you’ve navigated to this page, you can come in and out of it by tapping the button for quick access.
Well, it’s really a live thing: I start the samples and then decide when I drop them according to the play with the other musicians, sounds and instruments…
Maybe there is a way to use the MIDI trigs to stop the sample trigs. For instance: Button 9 stops sample 1 etc…
you can use this tricks to mute the sample almost instant :