Korg Nu:Tekt DIY Synth kit

Hawk · March 18, 2020, 12:11am

I’m a dumbass, the sync on my interface had gotten switched to internal so my second interface connected via ADAT which the Korg was plugged into wasn’t synced up, there’s the reason for the clicks and pops! All good, the Korg is running great. the Sub reverb rules and the tape delay is awesome.

mec1 · March 27, 2020, 8:46pm

free custom drum oscillator plug - don’t have the unit to test, but thought I would share:
http://ruismaker.com/korg/

DoS · April 7, 2020, 10:07am

Nick Batt has a look:

Seems like MIDI connections need careful attention, both regarding TRS>DIN adaptors and USB class-compliant MIDI.

shroom · April 7, 2020, 1:34pm

Lol that just brainwashed me and I ordered one, I have literallly nothing to do with this thing

Edit: Cancelling the order cause I just have more than enough…

sinkingfeeling · April 11, 2020, 2:20pm

Just got this in the other day and loving it so far. Here it is on its own, with the stock firmware, being sequenced by a Digitone. Enjoy.

PeterHanes · April 21, 2020, 12:00am

Has anyone found a SysEx specification for the NTS-1 yet?

@OscillatorSink ?

OscillatorSink · April 21, 2020, 5:35am

Hi!

github.com

oscillatorsink/nts-1-research/blob/master/sysex/patch_info.md

# Patch info sysex format for the NTS-1
## Caveat
This is a work in progress and almost certainly contains unknowns and errors. This research was conducted on an NTS-1 running firmware 1.10 and v1.0.0 of the Librarian software.

## General observations
### One 0x00 in 15
It looks like, after the first byte of (all?) messages (so that's byte 3 onwards), every 15 bytes a single nul (0x00) byte is inserted into the message. It might be for checking that the message isn't corrupted maybe? It's a bit weird. You can see it here:

```
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00000000  F0 42 30 00 01 57 49 01 00 00 00 01 03 00 01 01  ðB0..WI.........
00000010  00 44 00 75 6B 65 00 00 00 00 00 00 06 00 00 43  .D.uke.........C
00000020  72 75 00 73 68 65 72 00 00 00 00 00 00 00 00 00  ru.sher.........
00000030  00 00 00 00 F7                                   ....÷
```

You can see it at offsets `0x12 0x22 0x32`; it's especially clear where it's breaking up the name of the developer and effect.

## Hello message

This file has been truncated. show original

I need to finish writing this up, I have a fairly good grasp of the reply message, but it’s not on the repo yet. So far I’ve just been looking at getting information about the User oscs and fx. I’m hoping I’ll be able to work out the additional parameters too…

cold_fashioned · April 21, 2020, 10:14pm

I just got one of these for my birthday! Building was straightforward, except I got a bazillion of the tiny screws and none of the larger ones that hold the case together – did anyone else have this issue? Fortunately, I had enough screws in my box of random hardware to put it together. I suppose I’ll contact Korg USA to find out what they can do for me. Other than that, I’m looking forward to integrating this little guy into some jams. The on-board FX sound great, and I had fun playing with the ARP so far. If I were still going into the office, this is the perfect unit to have on my desk for a quick synth break during the day.

d_hansen · April 27, 2020, 6:08pm

Someone may have already asked this, and from the manual I can’t quite tell, but is it possible to run the external input through the effects while the internal synth itself stays dry?

Steppi · April 27, 2020, 8:24pm

No i don’t think so. The schematic looks like straight routing through the effects section:

Just the ext in can be routed via global menu:

But would be cool if anyone has a solution for this

sinkingfeeling · June 13, 2020, 4:24pm

Sinevibes came out with a new engine called Groove. It’s drum voices and a bass voice that basically turns the NTS-1(Prologue, Minilogue Xd) into a groove box! Really fun stuff.

https://www.sinevibes.com/korggroove/

And here’s a demo I made using the Digitakt to sequence it.

re5et · June 27, 2020, 6:00pm

I’ve seen a few developers selling fx / engines etc but I’m reluctant to buy them

Perhaps if they were priced like iOS apps I’d grab em but they seem quite expensive.

I don’t think I’d recoup much if I sold the synth .

Automageddon · August 4, 2020, 12:40pm

That’s how I use it.
Filter Lp4, cutoff all the way down, no resonance
Envelope set to Open.
I might now buy a distortion to put in the Mod slot so I can have a small print effect unit.

depuratumba · August 14, 2020, 10:40pm

wondering if this could be powerful enough as to capture a 2-bar sample (probably not) as to program some sort of transition looper, for example:

one knob to activate sampling
another one to crossfade from input to loop
third knob as dual filter LP/HP (DJ mixer style)

Something along those lines
With MIDI control it would of course be more usable (map a button 0-127 to enable sampling, 2 knobs for the other controls)

depuratumba · August 19, 2020, 2:35pm

just got mine yesterday… was fun and super simple to assemble, sounds pretty great.
it’s the perfect companion for the Microfreak, which lacks some FX
Haven’t tried it along Digitakt, although I feel like it could be a really nice and fast way to sample mono synth sounds - you could sample C in different octaves and create synth sample chains quite fast I guess

GovernorSilver · August 19, 2020, 3:08pm

New Arduino custom panel and customization ideas

spikysimon · August 19, 2020, 5:41pm

That’s pretty cool! If I had more spare time so I could futz around with music as well as electronics I might even dig out my old Arduino…

papertiger · September 2, 2020, 3:19pm

Are these all onboard sounds? no external processing?

sinkingfeeling · September 2, 2020, 3:53pm

Correct!

cold_fashioned · September 2, 2020, 9:01pm

whoa, that’s badass.