“Can’t be resolved.”
Yep that makes sense to me. I wasn’t thinking about the possibility of just having NEI conditions on every track.
Cheers!
The following 7 extra midi CC# for full control from DAW, same for Model:Samples
- Pad menu control(Fix on/off, VDep, Dest, DDep)
- Control all and undo (Reset)
- Reload pattern
And also:
LFO trigger mode in the lfo setup menu, the code is already there
LFO Reset via Midi CC works as a LFO trigger mode (Same as Analog Four for example)
-
CC108 value 0 FRE is the default free-running mode. The LFO
run continuously, never restarting or stopping. - CC108 value 1 TRG makes LFO1 restart when a note is played.
-
CC108 value 2 HLD makes LFO1 run free in the background, but
when a note is played the output LFO1 level is
latched and held still until the next note is played. -
CC108 value 3 ONE will make LFO1 start from the beginning
when a note is played, run for one cycle and then
stop. This makes it similar to an envelope. -
CC108 value 4 HLF will make LFO1 start from the beginning
when a note is played, run for half a cycle and
then stop.
I would say HLF behaves more like an envelope, but anyway, this is great!!! One and half cycle trigger modes are great for drums.
1 Like
Quantized Retrig please.
It would be very helpful and much more performance friendly if M:C’s retrig would start synced to BPM. Often when you want to use retrig in a performance it can be hard to hit the pad at the exact beat and then it just sounds off. And if the sound has delay on then that is really off too. Seems that there’s a free spot for it in the Retrig menu 
8 Likes
I would like:
-LFO locks so we can change the LFO destination and type per step (like machine locks)
-A way to load a new preset without changing the machine for the entire track. I guess if it automatically applied machine locks per step, this could work.
-Per track delay and reverb parameters. Rate of decay and reverb size per track would be great, but could interfere with CTRL ALL function
-Custom User Machines. Allow us to make our own machines via software.
-arps
-User Definable Chord Machine. Allow us to set the notes of each 4 voices.
There is always going to be more, but those would be pretty nice for me
1 Like
I’m requesting more available to buy. Where are they at?
Custom machines is a great idea! Doubt it’ll happen. But great idea anyway 
1 Like
I could be wrong but I remember hearing that elektron boxes are software prototyped and then it has to be rebuilt into machine code to run on the dsp. I might have the finer details wrong but I think this is partly what makes elektron devices so great but also probably would make user machines out of reach, probably too much potential for bugs and too much knowledge needed to actually make a new machine type.
2 Likes
You’re spot on. Originals were created by Ess in Max, then coded in by someone else for the hardware version with additional smoothing etc. Ess said in his Twitch streams that there were a lot of things that were rough and ready on the prototypes, that they fixed in code. So, yeah, I can’t see it happening but maybe a limited selection of modules that could be used by users in software could be a cool idea.
That will never happen, I do not think they are going to release their code…
2 Likes
This is already possible 
go into the LFO menu, hold a trig, and adjust the parameters as usual.
2 Likes
good to know it’s on the wishlist, i couldn’t find a way around that.
Please elektron implement this since the Parameter CC already send out through manual knob movement! This would bring all the power of the sequencer to external devices!
Global Tempo (optional)
I really don’t get why this was omitted since it is a stand alone groove box.
2 Likes
This would be significantly more useful than knobs sending CC’s.
Per pattern tempo is far better imo. Want all your patterns to match up, change their individual tempos to suit. Or send them midi clock from a master unit
5 Likes
Of course both modes should be possible, not meant as a replacement. On the DN (maybe all other machines) both are possible.
3 Likes
Whole number ratios for Tone Color when holding FUNC .
Currently holding FUNC jumps to 3.6, 6.8 and 15 which is not useful or musical. The whole numbers sounds really good and keeps the correct pitch.
6 Likes
Maybe someone already asked for it? Pad mute mode? Always active, not via func
1 Like
Faster blinker on PATTERN number buttons.
It helps to see the light in a split second. Thanks.
1 Like
Backup projects via Transfer
I just found that projects are not backed up via Transfer 
It’s really tedious to have to load each single project just to back it up and then you have to do a bunch of things in SysEx Librarian too 
1 Like
Different pages sizes. For example, 1st page has 10 notes, 2nd has 8.
1 Like